how to build a minimal Linux system for the STM32MP157 platform | Internal Links | Dofollow |
how to connect and use an I2C based pressure/temperature/humidity sensor | Internal Links | Dofollow |
how to integrate Qt5 in our system | Internal Links | Dofollow |
how to set up a development environment to write our own Qt5 application | Internal Links | Dofollow |
how to develop a Qt5 application | Internal Links | Dofollow |
how to setup factory flashing | Internal Links | Dofollow |
Building a Linux system for the STM32MP1: remote firmware updates | Internal Links | Dofollow |
i.MX6 factory flashing | Internal Links | Dofollow |
Embedded Linux | Internal Links | Dofollow |
Linux kernel | Internal Links | Dofollow |
Buildroot | Internal Links | Dofollow |
Yocto / OpenEmbedded | Internal Links | Dofollow |
Linux graphics | Internal Links | Dofollow |
Version française | Internal Links | Dofollow |
Follow new articles | Internal Links | Dofollow |
https://bootlin.com/ | External Links | Dofollow |
Home | External Links | Dofollow |
Engineering | External Links | Dofollow |
Training | External Links | Dofollow |
Docs | External Links | Dofollow |
Community | External Links | Dofollow |
Company | External Links | Dofollow |
Building a Linux system for the STM32MP1: remote firmware updates | External Links | Dofollow |
Building a Linux system for the STM32MP1: basic system | External Links | Dofollow |
Building a Linux system for the STM32MP1: connecting an I2C sensor | External Links | Dofollow |
Building a Linux system for the STM32MP1: enabling Qt5 for graphical applications | External Links | Dofollow |
swupdate | External Links | Dofollow |
Mender.io | External Links | Dofollow |
RAUC | External Links | Dofollow |
OSTree | External Links | Dofollow |
swupdate documentation | External Links | Dofollow |
software collections | External Links | Dofollow |
Eclipse hawkBit | External Links | Dofollow |
getting started | External Links | Dofollow |
http://localhost:8080 | External Links | Dofollow |
2019.02/stm32mp157-dk-blog-7 | External Links | Dofollow |
one for the first step | External Links | Dofollow |
another one | External Links | Dofollow |
Thomas Petazzoni | External Links | Dofollow |
Technical | External Links | Dofollow |
st | External Links | Dofollow |
stm32mp1 | External Links | Dofollow |
swupdate | External Links | Dofollow |
Leave a comment on Building a Linux system for the STM32MP1: remote firmware updates | External Links | Dofollow |
Bootlin at Embedded World 2020 | External Links | Dofollow |
Embedded World 2020 | External Links | Dofollow |
STMicroelectronics | External Links | Dofollow |
get in touch with us | External Links | Dofollow |
4 Comments on Bootlin at Embedded World 2020 | External Links | Dofollow |
Linux 5.5 released, Bootlin contributions inside | External Links | Dofollow |
Linux 5.5 | External Links | Dofollow |
merge window part 1 | External Links | Dofollow |
merge window part 2 | External Links | Dofollow |
Kernelnewbies wiki | External Links | Dofollow |
statistics | External Links | Dofollow |
blog post | External Links | Dofollow |
pinctrl: at91-pio4: implement .get_multiple and .set_multiple | External Links | Dofollow |
rtc: m41t80: set range | External Links | Dofollow |
rtc: add a timestamp for year 0 | External Links | Dofollow |
rtc: ds1347: remove verbose messages | External Links | Dofollow |
rtc: ds1347: remove useless read | External Links | Dofollow |
rtc: ds1347: simplify getting .driver_data | External Links | Dofollow |
rtc: ds1347: mask ALM OUT when reading time | External Links | Dofollow |
rtc: ds1347: convert to devm_rtc_allocate_device | External Links | Dofollow |
rtc: ds1347: set range | External Links | Dofollow |
rtc: ds1347: properly handle oscillator failures | External Links | Dofollow |
rtc: ds1347: use regmap_update_bits | External Links | Dofollow |
rtc: ds1347: handle century register | External Links | Dofollow |
ARM: configs: at91: unselect PIT | External Links | Dofollow |
rtc: meson-vrtc: move config option to proper location | External Links | Dofollow |
dt-bindings: net: lpc-eth: document optional properties | External Links | Dofollow |
net: lpc_eth: parse phy nodes from device tree | External Links | Dofollow |
rtc: s35390a: convert to devm_rtc_allocate_device | External Links | Dofollow |
rtc: s35390a: set range | External Links | Dofollow |
rtc: add timestamp for end of 2199 | External Links | Dofollow |
rtc: vt8500: remove useless label | External Links | Dofollow |
rtc: vt8500: remove superfluous error message | External Links | Dofollow |
rtc: vt8500: convert to devm_rtc_allocate_device | External Links | Dofollow |
rtc: vt8500: let the core handle rtc range | External Links | Dofollow |
rtc: introduce lock helpers | External Links | Dofollow |
rtc: ds1343: set range | External Links | Dofollow |
rtc: ds1343: remove dead code | External Links | Dofollow |
rtc: ds1343: use burst write to set time | External Links | Dofollow |
rtc: ds1343: use rtc_add_group | External Links | Dofollow |
rtc: ds1343: use regmap_update_bits for glitch filter | External Links | Dofollow |
rtc: ds1343: check regmap_read return value | External Links | Dofollow |
rtc: ds1343: remove unnecessary mutex | External Links | Dofollow |
rtc: ds1343: rework interrupt handling | External Links | Dofollow |
rtc: ds1343: cleanup .remove | External Links | Dofollow |
rtc: fsl-ftm-alarm: switch to ktime_get_real_seconds | External Links | Dofollow |
rtc: fsl-ftm-alarm: switch to rtc_time64_to_tm/rtc_tm_to_time64 | External Links | Dofollow |
rtc: fsl-ftm-alarm: avoid struct rtc_time conversions | External Links | Dofollow |
rtc: disable uie before setting time and enable after | External Links | Dofollow |
rtc: disallow update interrupts when time is invalid | External Links | Dofollow |
rtc: ab-b5ze-s3: remove .remove | External Links | Dofollow |
rtc: lpc32xx: remove .remove | External Links | Dofollow |
rtc: sc27xx: remove .remove | External Links | Dofollow |
rtc: sirfsoc: remove .remove | External Links | Dofollow |
rtc: cros-ec: remove superfluous error message | External Links | Dofollow |
rtc: cros-ec: let the core handle rtc range | External Links | Dofollow |
rtc: interface: fix kerneldoc comments | External Links | Dofollow |
rtc: sysfs: fix hctosys_show kerneldoc | External Links | Dofollow |
rtc: ds1374: remove unused variable | External Links | Dofollow |
rtc: ds1685: remove set but unused variables | External Links | Dofollow |
rtc: ds1685: fix build error with make W=1 | External Links | Dofollow |
rtc: m41t80: remove excess kerneldoc | External Links | Dofollow |
rtc: pm8xxx: update kerneldoc for struct pm8xxx_rtc | External Links | Dofollow |
rtc: tegra: remove set but unused variable | External Links | Dofollow |
rtc: v3020: remove set but unused variable | External Links | Dofollow |
clk: at91: fix possible deadlock | External Links | Dofollow |
ARM: dts: imx6q-dhcom: fix rtc compatible | External Links | Dofollow |
rtc: cmos: Revert “rtc: Fix the AltCentury value on AMD/Hygon platform” | External Links | Dofollow |
net: macb: move the Tx and Rx buffer initialization into a function | External Links | Dofollow |
net: macb: convert to phylink | External Links | Dofollow |
of: mdio: export of_mdiobus_child_is_phy | External Links | Dofollow |
net: macb: fix probing of PHY not described in the dt | External Links | Dofollow |
spi: atmel: Remove AVR32 leftover | External Links | Dofollow |
spi: Fix SPI_CS_HIGH setting when using native and GPIO CS | External Links | Dofollow |
spi: atmel: Remove and fix erroneous comments | External Links | Dofollow |
spi: atmel: Fix CS high support | External Links | Dofollow |
spi: atmel: Configure GPIO per CS instead of by controller | External Links | Dofollow |
spi: atmel: Remove useless private field | External Links | Dofollow |
spi: atmel: Remove platform data support | External Links | Dofollow |
spi: atmel: Improve and fix GPIO CS usage | External Links | Dofollow |
spi: atmel: Improve CS0 case support on AT91RM9200 | External Links | Dofollow |
spi: Fix NULL pointer when setting SPI_CS_HIGH for GPIO CS | External Links | Dofollow |
pinctrl: armada-37xx: Fix irq mask access in armada_37xx_irq_set_type() | External Links | Dofollow |
ARM: dts: at91: sama5d2: add an rtc label for derived boards | External Links | Dofollow |
dt-bindings: Add vendor prefix for Overkiz SAS | External Links | Dofollow |
dt-bindings: arm: at91: Document Kizbox3 HS board binding | External Links | Dofollow |
ARM: dts: at91: add Overkiz KIZBOX3 board | External Links | Dofollow |
dt-bindings: arm: at91: Document Kizbox2-2 board binding | External Links | Dofollow |
ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards | External Links | Dofollow |
soc: at91: Add Atmel SFR SN (Serial Number) support | External Links | Dofollow |
ASoC: dt-bindings: Convert Allwinner A23 analog codec to a schema | External Links | Dofollow |
spi: mxic: Select SPI_NOR type by default | External Links | Dofollow |
spi: mxic: Fix DMAS_CTRL register layout | External Links | Dofollow |
spi: mxic: Ensure width is respected in spi-mem operations | External Links | Dofollow |
clk: mvebu: armada-37xx-periph: add PCIe gated clock | External Links | Dofollow |
clk: mvebu: armada-37xx-periph: change suspend/resume time | External Links | Dofollow |
dt-bindings: clk: armada3700: fix typo in SoC name | External Links | Dofollow |
dt-bindings: clk: armada3700: document the PCIe clock | External Links | Dofollow |
arm64: dts: marvell: Enumerate the first AP806 syscon | External Links | Dofollow |
mtd: Initialize all parameters of mtd_oob_ops | External Links | Dofollow |
arm64: dts: marvell: Add AP806-dual missing CPU clocks | External Links | Dofollow |
MAINTAINERS: Add new Marvell CN9130-based files to track | External Links | Dofollow |
arm64: dts: marvell: Move clocks to AP806 specific file | External Links | Dofollow |
dt-bindings: marvell: Convert the SoC compatibles description to YAML | External Links | Dofollow |
arm64: dts: marvell: Add support for AP807/AP807-quad | External Links | Dofollow |
arm64: dts: marvell: Fix CP110 NAND controller node multi-line comment alignment | External Links | Dofollow |
arm64: dts: marvell: Prepare the introduction of CP115 | External Links | Dofollow |
arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file | External Links | Dofollow |
arm64: dts: marvell: Externalize PCIe macros from CP11x file | External Links | Dofollow |
arm64: dts: marvell: Add support for CP115 | External Links | Dofollow |
arm64: dts: marvell: Add support for Marvell CN9130 SoC support | External Links | Dofollow |
iio: adc: max1027: Add debugfs register read support | External Links | Dofollow |
iio: adc: max1027: Make it optional to use interrupts | External Links | Dofollow |
iio: adc: max1027: Reset the device at probe time | External Links | Dofollow |
iio: adc: max1027: Prepare the introduction of different resolutions | External Links | Dofollow |
iio: adc: max1027: Introduce 12-bit devices support | External Links | Dofollow |
dt-bindings: iio: adc: max1027: Mark interrupts as optional | External Links | Dofollow |
dt-bindings: Add 1027/1029/1031 SPI ADCs as trivial devices | External Links | Dofollow |
dt-bindings: Add max12xx SPI ADC series as trivial devices | External Links | Dofollow |
MAINTAINERS: mtd/ubi/ubifs: Remove inactive maintainers | External Links | Dofollow |
mtd: spear_smi: Fix Write Burst mode | External Links | Dofollow |
MAINTAINERS: ubi/ubifs: Update the Git repository | External Links | Dofollow |
spi: zynq-qspi: Keep the naming consistent across the driver | External Links | Dofollow |
spi: zynq-qspi: Anything else than CS0 is not supported yet | External Links | Dofollow |
spi: zynq-qspi: Keep the bitfields naming consistent | External Links | Dofollow |
spi: zynq-qspi: Enhance the Linear CFG bit definitions | External Links | Dofollow |
spi: zynq-qspi: Clarify the select chip function | External Links | Dofollow |
spi: zynq-qspi: Do the actual hardware initialization later in the probe | External Links | Dofollow |
spi: zynq-qspi: Support two chip selects | External Links | Dofollow |
Input: edt-ft5x06 – add support for regulator | External Links | Dofollow |
ARM: dts: sun8i: a83t: a711: Add touchscreen node | External Links | Dofollow |
media: cedrus: Fix undefined shift with a SHIFT_AND_MASK_BITS macro | External Links | Dofollow |
media: cedrus: Remove unnecessary parenthesis around DIV_ROUND_UP | External Links | Dofollow |
media: v4l: Add definitions for HEVC stateless decoding | External Links | Dofollow |
media: pixfmt: Document the HEVC slice pixel format | External Links | Dofollow |
media: cedrus: Add HEVC/H.265 decoding support | External Links | Dofollow |
kernel | External Links | Dofollow |
linux | External Links | Dofollow |
Leave a comment on Linux 5.5 released, Bootlin contributions inside | External Links | Dofollow |
Bootlin at FOSDEM and Buildroot Developers Meeting | External Links | Dofollow |
https://www.fosdem.org | External Links | Dofollow |
Embedded, Mobile and Automative Devroom | External Links | Dofollow |
Buildroot Developers meeting | External Links | Dofollow |
Conference | External Links | Dofollow |
buildroot | External Links | Dofollow |
fosdem | External Links | Dofollow |
Leave a comment on Bootlin at FOSDEM and Buildroot Developers Meeting | External Links | Dofollow |
Building a Linux system for the STM32MP1: implementing factory flashing | External Links | Dofollow |
eMMC | External Links | Dofollow |
NAND flash | External Links | Dofollow |
STM32MP157A-EV1 | External Links | Dofollow |
mfgtools | External Links | Dofollow |
imx_usb_loader | External Links | Dofollow |
SAM-BA | External Links | Dofollow |
rkdeveloptool | External Links | Dofollow |
STM32 Cube Programmer | External Links | Dofollow |
this Wiki page | External Links | Dofollow |
this Wiki page | External Links | Dofollow |
9dbc934217e170578d4cbfdf524bc1b3988d0b9e | External Links | Dofollow |
e4d276c357fdf9f19f99f826cab63f373687f902 | External Links | Dofollow |
2019.02/stm32mp157-dk-blog-6 | External Links | Dofollow |
OP-TEE | External Links | Dofollow |
this Wiki page | External Links | Dofollow |
on the Wiki page | External Links | Dofollow |
stm32 | External Links | Dofollow |
tf-a | External Links | Dofollow |
uboot | External Links | Dofollow |
5 Comments on Building a Linux system for the STM32MP1: implementing factory flashing | External Links | Dofollow |
Page 2 | External Links | Dofollow |
Page 87 | External Links | Dofollow |
Quick news (Mastodon) | External Links | Dofollow |
Quick news (Twitter) | External Links | Dofollow |
News and discussions (LinkedIn) | External Links | Dofollow |
2019 at Bootlin, a year in review | External Links | Dofollow |
Linux 5.4 released, Bootlin contributions inside | External Links | Dofollow |
Security contributions to OpenWrt: dm-verity and SELinux | External Links | Dofollow |
Back from ELCE 2019: our selection of talks | External Links | Dofollow |
Privacy Policy | External Links | Dofollow |
Proudly powered by WordPress | External Links | Dofollow |
Social
Social Data
Cost and overhead previously rendered this semi-public form of communication unfeasible.
But advances in social networking technology from 2004-2010 has made broader concepts of sharing possible.